Highlight the performance
This series is an innovative LED pitch-lighting solution that supports the latest TV broadcasting standards based on the multi decennial experience of PERFORMANCE iN LIGHTING in the professional lighting field and the knowledge of national and international standards and features professional and sports application.
The new LASER+ is, in fact, broadcast-ready and finds its best expression in such demanding lighting. International sports competitions and airports, ports, maritime terminals, logistics areas, and in large general areas are its natural context of use.
This range of PERFORMANCE iN LIGHTING professional high-power floodlights stands out immediately for its performance, lightness, limited wind exposure and multi-tilting modules. Furthermore, if resistance to an aggressive ambient temperature is required, LASER+ guarantees optimised performance without resorting to dimming thanks to the EXTREME options.
LED floodlight for indoor and outdoor lighting, comprising:
Construction
- Die-cast aluminium bearing structure chemically pretreated and painted with polyester powder coating ISO 9227
- High resiliency anti-ageing silicone gasket with high elastic return capacity
- Diffuser with integrated louvre in UV, heat stabilised, transparent technopolymer
- High-transparency polycarbonate lenses grant an optimized light transmission
- Stainless steel external screws
- Galvanised polyester powder painted steel bracket
- Graduated goniometer for aiming purposes
- Die-cast aluminium electrical connection box polyester powder painted after chemical conversion treatment of the surface
Electrical
- Integral surge protection device (SPD) against mains overvoltages up to 10 kV
- IP66 DALI and DMX512-RDM dimming power control gears available. The electrical connection between control gear and floodlight must take place with a maximum cable length of 100 metres
- LASER+ 10 is standard equipped with DALI driver. Versions with DMX512-RDM dimming available. Consult factory
- The LASER+ 10 versions are complete with supplementary device for protection against mains surges of up to 10 kV (CM and DM)
Installation
- IP66 quick connector allows electrical connection with the power supply unit without opening the luminaire, made in PA66 polyamide; 7 pins for Ø 13 - Ø 18 mm cables (LASER+ 30), or 5 pins for Ø 7 - Ø 14 mm cables (LASER+ 20)
- The LASER+ 10 version integrates the control gearbox, placed in a painted, sheet metal compartment. The electrical connection takes place in a specific polyamide box trough an M25x1.5 anti-tearing cable gland for Ø 9 - Ø 16 mm cables
- Correctly match the floodlight with the control gear. Pay attention to the models and the number of connection channels: two channels (2CH) and three channels (3CH)
- To connect the LASER+ use the control gears supplied as accessories only
Listings
- CE
- EAC
- RCM
- ENEC pending
- Made in Italy
Warranty
- 5-year limited warranty. Complete warranty terms located at www.performanceinlighting.com
The correct sizing of the heat sinks is the result of thorough fluid dynamics studies, and ensures a constant luminous flux up to the maximum declared ambient temperature (without flux decrease at high temperatures).
High efficiency heat sink made in die-cast aluminum.
Anodised extruded aluminum ultra high efficiency heat sink.
Die-cast aluminum electrical junction box.
The electrical connection between the light engine and the waterproof junction box is insured by a metal cable gland and an extra sealing.
Electrical connection through a 1.5-meter piece of H07RN-F 7G1.5 cable, allowing the electrical connection without opening the luminaire body.
Diffuser with integrated optical lenses in UV, heat stabilised, transparent techno polymer.
Set screws lock the rotation of each adjustable module.
Future proof, replaceable LED modules.
To connect the LASER+ use the control gears supplied as accessories only.
IP66 DALI and DMX512-RDM dimming power control gears available.
The electrical connection between the control gears and the floodlights must take place with a maximum cable length of 100 meters.
Visor.
Sight mount.
Thanks to its advanced technology and meticulous design, LASER+ is the ultimate solution for professional and sport lighting.
LASER+ is broadcast ready and is ideally conceived for lighting of large areas, stadia, warehouse areas, airports and sea terminals.
It features extremely high performances and application flexibility thanks to its individually rotatable modules.